Hardware Specification |
IEEE Standards |
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3ad for LACP (Link Aggregation Control)
IEEE 802.3x for Flow control
IEEE 802.1D for STP (Spanning Tree)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree)
IEEE 802.1s for MSTP (Multiple Spanning Tree)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery) |
Switch Architecture |
Back-plane (Switching Fabric): 1.6Gbps |
Transfer Rate |
14,880pps for Ethernet port
148,800pps for Fast Ethernet port |
Packet Buffer |
1Mbits |
Mac Address |
8K MAC address table |
Flash ROM |
4Mbytes |
DRAM |
32Mbytes |
Connectors |
10/100TX: 6 x RJ-45 with auto MDI/MDI-X function
100M fiber: 2 x SC/WDM type connector for single-mode or multi-mode type fiber cable
RS-232 connector: RJ-45 type |
Network Cable |
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E cable
EIA/TIA-568 100-ohm (100m) |
Optical Cable |
Multi-mode: 50/125um~62.5/125um
Single mode: 9/125um
Available distance: 2km (Multi-mode)/30km (Single-mode)
Wavelength: 1310nm (Multi-mode/Single-mode) |
Protocol |
CSMA/CD |
?LED |
Per unit: Power (Green), Power 1 (Green), Power 2 (Green), Fault (Red), Master (Green)
6 10/100: Link/Activity (Green), Full duplex/Collision (Yellow)
Fiber: Link/Activity (Green) |
Power Supply |
24 VDC (9~56VDC), 12~36VAC, Redundant power with polarity reverse protect function and removable terminal block. |
Power Consumption |
9 Watts |
Operating Humidity |
5% to 95% (Non-condensing) |
Operating Temperature |
-20°C~60°C / -4°F~140°F (Standard model)
-40°C~75°C / -40°F~167°F (E model) |
Storage Temperature |
-40°C~85°C / -40°F~185°F |
Case Dimension |
IP-30, 52mm (W) x 106mm (D) x 144mm (H) |
Weight |
735 g |
Fan Number |
0 |
Installation |
DIN rail and wall mount ear. |
MTBF |
232,194 hrs |
EMI &EMS |
FCC Class A, CE EN61000-4-2 (ESD), CE EN61000-4-3 (RS), CE EN-61000-4-4 (EFT),
CE EN61000-4-5 (Surge), CE EN61000-4-6 (CS), CE EN61000-4-8, CE EN61000-4-11, |
Safety |
CE/EN60950-1 |
Stability Testing |
IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration) |
Warranty |
5 years |
Software Specification |
Management |
SNMP v1 v2c, v3/ Web-browser/ Telnet/ CLI/ Lantech-View Management |
SNMP MIB |
RFC 1215 Trap, RFC1213 MIBII, RFC 1157 SNMP MIB, RFC 1493 Bridge MIB, RFC 2674 VLAN MIB, RFC 1643 , RFC 1757, RSTP MIB, Private MIB |
VLAN |
Port Based VLAN
IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to 4K, VLAN ID can be assigned from 1 to 4096.)
GVRP (256 Groups)
Double tag VLAN (QinQ) |
Port Trunk with LACP |
LACP Port Trunk: 4 Trunk groups/Maximum 4 trunk members |
LLDP |
Supports LLDP to allow switch to advise its identification and capability on the LAN |
Spanning Tree |
Supports IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree
IEEE802.1s Multiple Spanning Tree (option) |
Pro-Ring |
Supports X-Ring, Dual Homing, and Couple Ring Topology.
Provides redundant backup feature and the recovery time below 10ms for up to 250 switches in a ring |
Quality of Service |
The quality of service determined by port, Tag and IPv4 Type of service, IPv4/IPv6 Different Service |
Class of Service |
Supports IEEE802.1p class of service, per port provides 4 priority queues |
Port Security |
Supports 100 entries of MAC address for static MAC and another 100 for MAC filter |
Mac Address Filtering |
Up to 50 Mac address list to block the entry of switch |
Port Mirror |
Supports 3 mirroring types: “RX, TX and Both packet”. |
IGMP |
Supports IGMP snooping v1,v2
1024 multicast groups and IGMP query
Support multicast filter |
Login Security |
Supports IEEE802.1X Authentication/RADIUS |
System Log |
Supports System log record and remote system log server |
IP Security |
Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder. |
Bandwidth Control |
Supports ingress packet filter and egress packet limit
The egress rate control supports all of packet type and the limit rates are 100K~250Mbps
Ingress filter packet type combination rules are Broadcast/Multicast/Unknown Unicast packet, Broadcast/Multicast packet, Broadcast packet only and all of packet. The packet filter rate can be set from 100k to 250Mbps |
Flow Control |
Supports Flow Control for Full-duplex and Back Pressure for Half-duplex |
SMTP |
Supports SMTP Server and 6 e-mail accounts for receiving event alert |
Relay Alarm |
Provides one relay output for port breakdown, power fail and alarm
Alarm Relay current carry ability: 1A @ DC24V |
SNTP |
Supports SNTP to synchronize system clock in Internet |
SNMP Trap |
Up to 3 Trap stations. Cold start, Port link up, Port link down, Authentication Failure, Private Trap for power status, Port Alarm configuration, Fault alarm, X-Ring topology change |
DHCP |
Provides DHCP Client/ DHCP Server/ IP Relay functions |
DNS |
Provides DNS client feature and support Primary and Secondary DNS server. |
Firmware Update |
Supports TFTP firmware update, TFTP backup and restore. |
Configuration upload and download |
Supports binary configuration file for system quick installation
Auto Provision for new firmware discovery |
ifAlias |
Each port allows importing 128bit of alphabetic string of word on SNMP and CLI interface. |
*Future Release
**Optional |
Lantech-View, 
