Hardware Specification |
Standard |
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3z Gigabit fiber
IEEE802.3x Flow Control and Back Pressure
IEEE802.3ad Port trunk with LACP
IEEE802.1d Spanning Tree
IEEE802.1w Rapid Spanning Tree
IEEE802.1p Class of Service
IEEE802.1Q VLAN Tag
IEEE 802.1x User Authentication (Radius)
IEEE802.1ab LLDP |
Switch Architecture |
Back-plane (Switching Fabric): 16Gbps
Packet throughput ability (Full-Duplex): 23.8Mpps @64bytes |
Transfer Rate |
14,880 pps for 10Base-T Ethernet
148,800 pps for 100Base-TX Fast Ethernet
1,488,000 pps for Gigabit Ethernet port |
Packet Buffer |
1Mbits |
Mac Address |
8K MAC address table |
Flash ROM |
4Mbytes |
DRAM |
32Mbytes |
Connector |
10/100/1000T: 6 ports RJ-45 with Auto MDI/MDI-X function
10/100/1000T/Mini GBIC Combo:2 x RJ-45 + 2 x 100/100 SFP sockets
RS-232 connector: RJ-45 type |
Network Cable |
10/100/1000Base-T:
2-pair UTP/STP Cat. 5e/6 cable EIA/TIA-568 100-ohm (100m)
SFP (Mini-GBIC):
Multi-mode: 50/125μm~62.5/125μm
Single-mode: 9/125μm |
Protocol |
CSMA/CD |
LED |
Per unit: Power (Green), Power 1 (Green), Power 2 (Green), Fault (Yellow), Master (Green)
Per port: Link/Activity (Green), speed ( 1000 Green)
Mini GBIC: Link/Activity (Green) |
Power Supply |
Input Power Isolation design for Telcom application, Pass Hi-Pot test~1.5KV
24 VDC (9~56VDC), 12~36VAC (Optional), Redundant power with polarity reverse protect function and connective removable terminal block for master and slave power |
Power Consumption |
18 Watts |
Operating Humidity |
5% ~ 95% (Non-condensing) |
Operating Temperature |
Standard models: -20°C~60°C / -4°F~140°F
Wide Operating Temperature for E models:
-40°C~75°C / -40°F~167°F |
Storage Temperature |
-40°C~85°C / -40°F~185°F |
MTBF |
248507 hrs |
Fan Number |
0 |
Installation |
DIN Rail and Wall Mount Design |
Case Dimension |
Metal case. IP-30,
72mm (W) x 105mm (D) x 152mm (H) |
Weight |
1418 g |
EMI & EMS |
FCC Class A,
CE EN61000-4-2 (ESD),
CE EN61000-4-3 (RS),
CE EN61000-4-4 (EFT),
CE EN61000-4-5 (Surge),
CE EN61000-4-6 (CS),
CE EN61000-4-8,
CE EN61000-4-11,
CE EN61000-4-12,
CE EN61000-6-2,
CE EN61000-6-4 |
Safety |
UL, cUL, CE/EN60950-1 |
Stability Testing |
IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration) |
Warranty |
5 years |
Software Specification |
Management |
SNMP v1 v2c, v3/ Web/Telnet/CLI/Menu Driven** Management |
SNMP MIB |
RFC 1215 Traps MIB,
RFC 1213 MIBII,
RFC 1157 SNMP MIB,
RFC 1493 Bridge MIB,
RFC 2674 VLAN MIB,
RFC 1643 EtherLike,
RFC 1757 RMON,
RSTP MIB,
Private MIB,
LLDP MIB |
VLAN |
Port Based VLAN
IEEE 802.1Q Tag VLAN (256 entries)
VLAN ID
(Up to 4K, VLAN ID can be assigned from 1 to 4096.)
GVRP (256 Groups)
Double Tag VLAN(Q in Q)*
Private VLAN** |
LLDP |
Supports LLDP to allow switch to advise its identification and capability on the LAN |
Spanning Tree |
Supports IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree |
X-Ring |
Supports X-ring, Dual Homing, and Couple Ring
Provides redundant backup feature and the recovery time below 10ms*** |
Quality of Service |
The quality of service determined by port, Tag and IPv4 Type of service, IPv4/ IPv6Different Service |
Class of Service |
Supports IEEE802.1p class of service, per port provides 4 priority queues |
Port Security |
Supports 100 entries of MAC address for static MAC and another 100 for MAC filter |
Port Mirror |
Supports 3 mirroring types: "RX, TX and Both packet". |
IGMP |
Supports IGMP snooping v1,v2
256 multicast groups and IGMP query |
IP Security |
Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder. |
Bandwidth Control |
Supports ingress packet filter and egress packet limit
The egress rate control supports all of packet type and the limit rates are 100K~250Mbps
Ingress filter packet type combination rules are Broadcast/Multicast/Unknown Unicast packet, Broadcast/Multicast packet, Broadcast packet only and all of packet. The packet filter rate can be set from 100k to 250Mbps |
Flow Control |
Supports Flow Control for Full-duplex and Back Pressure for Half-duplex |
System Log |
Supports System log record and remote system log server |
SNTP |
Supports SNTP to synchronize system clock in Internet |
SMTP |
Supports SMTP Server and 6 e-mail accounts for receiving event alert |
Relay Alarm |
Provides one relay output for port breakdown, power fail and alarm
Alarm Relay current carry ability: 1A @ DC24V |
SNMP Trap |
Up to 3 Trap stations
Cold start, Port link up, Port link down, Authentication Failure, Private Trap for power status, Port Alarm configuration, Fault alarm, X-ring topology change |
DHCP |
Provides DHCP Client/ DHCP Server/ IP Relay functions |
DNS |
Provides DNS client feature and supports Primary and Secondary DNS server. |
Firmware Update |
Supports TFTP firmware update, TFTP backup and restore. |
Configuration
upload and download |
Supports text format configuration file for system quick installation |
Port Trunk with LACP |
LACP Port Trunk: 4 Trunk groups/Maximum 4 trunk members |
Login Security |
Supports IEEE802.1X Authentication/RADIUS |
*Future release
**Optional
***The Recovery Time of X-Ring: SFP<10ms ; G-T<150ms |