Beijing Xiongyue Technology Co., Ltd.

Home

Profile

Ethernet

Recruitment

Industrial Entry Switches

Industrial Smart-Ring Switches

Industrial Managed Switches

Industrial DNV Type

Industrial IEC 61850 Switches

Industrial IP67 / EN50155 Switches

Industrial Converters Series

Industrial PoE Series
  -IPEC-0101FT
  -IPES-0005T-4
  -IPES-0104FT
  -IPES-2208C
  -IPES-2224C-24

Industrial Device Server

Mini-GBIC/GBIC Series

Software & Accessories

	IPES-0104FT

4-Port 10/100TX + 1-Port 100FX w/ 4 PoE Injector Industrial
Switch

IEEE 802.3af PoE standard
Built-in 4port PoE injectors
Relay contact to connect with alarm system
Wall-mountable and DIN rail mountable

Overview
Features
Specifications
Ordering Info
Applications
Downloads

OVERVIEW

The Lantech IPES-0104FT is a 4 x 10/100TX + 1 100FX with 4-PoE-injector Industrial PoE Switch for plug-and-play installation. This slim switch is Wall-mountable or DIN rail mountable, making installation easier and flexible.

The IPES-0104FT is designed to meet with critical network environment with IP 30 enclosure and test under extensive Industrial EMI and Safety standards. It supports EFT protection for 3000VDC power and 4000VDC Ethernet ESD protection, which can reduce unstable environment damage caused by power line and Ethernet. The IPES-0104FT also supports IEEE 802.3af standard for PoE auto-detection and PoE classification resistors for hand-shaking with PD (power device), which can prevent any connected devices from burning down by sending high voltage (48V) out.

The Lantech IPES-0104FT is the best Industrial switch to connect with IP Camera, Wireless Equipments where are placed outdoor or tight space cabinet such as schools and wireless hotspots.

FEATURES

System Interface/Performance

RJ-45 port support Auto MDI/MDI-X Function
Embedded 4-port PoE Injector Function
Store-and-Forward Switching Architecture
Back-plane (Switching Fabric): 1.0Gbps
1K MAC Address Table

Provides EFT protection 3000 VDC for power line

Supports 4000 VDC Ethernet ESD protection

Case/Installation

IP-30 Metal Housing Protection
DIN Rail and Wall Mount Design

Power Supply

DC 48V Redundant Power
Overload Current Re-settable Fuse Present

Pass ESD Sensitivity Classification (class A)

cUL (CSA/UL) Safety certified

SPECIFICATIONS

IEEE Standards	IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX and 100Base-FX Fast Ethernet IEEE802.3x Flow Control and Back Pressure IEEE802.3af Power over Ethernet
Switch Architecture	Back-plane (Switching Fabric): 1.0Gbps Packet throughput ability (Full-Duplex): 1.488Mpps @64bytes
Transfer Rate	14,880pps for Ethernet port 148,800pps for Fast Ethernet port
Mac Address	1K MAC address table
Connectors	10/100TX: 4 x RJ-45 with auto MDI/MDI-X function; Support PoE injector function 100M fiber: 1 x SC type connector for Single-mode or Multi-mode type fiber cable
PoE pin assignment	RJ-45 port # 1~# 4 support IEEE 802.3af End-point, Alternative B mode. Positive (VCC+): RJ-45 pin 1, 2. Negative (VCC-): RJ-45 pin 3, 6. Data (1,2,3,6 )
Network Cable	10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5 cable EIA/TIA-568 100-ohm (100m)
Optical Cable	Multi-mode: 50/125um~62.5/125um Single-mode: 9/125um Available distance: 2km (Multi-mode)/30km (Single-mode) Wavelength: 1310nm (Multi-mode/Single-mode)
Protocol	CSMA/CD
LED	Per unit: Power 1 (Green), Power 2 (Green), Fault(Red) Fiber: Link/Active(Green) TX: Link/Active(Green), Full duplex/Collision (Yellow) PoE: Feeding Power (Green)
Power Supply	48VDC (45~56VDC) Redundant Power
Power Consumption	6.6 Watts
Overload current protection	Present
Operating Humidity	5% ~ 95% (Non-condensing)
Operating Temperature	-10°C~60°C (14°F~140°F)
Storage Temperature	-40°C~85°C (-40°F~185°F)
Case Dimension	Metal case. IP-30, 30mm (W) x 95mm (D) x 140mm (H)
Weight	824 g
Installation	DIN Rail and Wall Mount Design
EMI & EMS	FCC Class A, CE EN61000-4-2 (ESD), CE EN61000-4-3 (RS), CE EN61000-4-4 (EFT), CE EN61000-4-5 (Surge), CE EN61000-4-6 (CS), CE EN61000-4-8, CE EN61000-4-11, CE EN61000-6-2, CE EN61000-6-4
Safety	UL, cUL, CE/EN60950-1
Stability Testing	IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)
MTBF	259356 hrs
Warranty	5 years

ORDERING INFOMATION

IPES-0104FT (SC/MM 2km).….......P/N: 8350-911
4 10/100TX + 1 100FX (SC, MM 2km) w/ 4 PoE Injector Industrial Switch
IPES-0104FT (SC/SM 30km)..........P/N: 8350-912
4 10/100TX + 1 100FX (SC, SM 30km) w/ 4 PoE Injector Industrial Switch

OPTIONAL ACCESSORIES

DIN Rail Power

AD1240-48S
48VDC, 5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
AD1120-48F
48VDC, 2.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C

APPLICATIONS

DOWNLOADS

Description				Download

IPES-0104FT Datasheet

IPES-0104FT Manual