Beijing Xiongyue Technology Co., Ltd.

Home

Profile

Ethernet

Recruitment

Industrial Entry Switches

Industrial Smart-Ring Switches

Industrial Managed Switches

Industrial DNV Type

Industrial IEC 61850 Switches

Industrial IP67 / EN50155 Switches

Industrial Converters Series

Industrial PoE Series
  -IPEC-0101FT
  -IPES-0005T-4
  -IPES-0104FT
  -IPES-2208C
  -IPES-2224C-24

Industrial Device Server

Mini-GBIC/GBIC Series

Software & Accessories

	IPEC-0101FT

1-Port 10/100TX to 100M-FX Slim Type Media Converter
w/PoE injector

Built-in LFP & LLF technology
Wide operating temperature range from -40°C to 75°C (-E model)
Redundant power supply
Provides 3K VDC EFT and 6K VDC ESD protection

Overview
Features
Specifications
Ordering Info
Applications
Downloads

OVERVIEW

The Lantech IPEC-0101FT Industrial PoE Converter is a slim type Industrial media converter with PoE injector built-in in which has an unique DIP switch to adjust 100M duplex mode and LLF (Link Loss Forwarding) function. Through the DIP switch, you can also set power alarm and pure converter mode.

Complying with IEEE802.3af PoE standard, the IPEC-0101FT is able to feed up to 15.4W from its PoE port. The IPEC-0101FT also supports 3000V EFT and 6000V ESD protection, reducing unstable condition caused by power line and Ethernet.

Lantech’s each UTP to Fiber converter equips LLF function for auto-cut off all connection if one end is link down. The built-in LFP (Link Fault Pass-Through) function is to cut off Fiber TX or RX when either one has lost connection then trigger LLF to cut off all connection. Smart LLF and LFP function alerts central side switch immediate remedy action when connection is lost.

The Lantech IPEC-0101FT is the best Industrial PoE converter for longer distance demand where are placed in outdoor or tight space cabinet for various applications like Factory Automation, Building Automation, SCADA, Warehousing, Traffic Control or Video Surveillance.

FEATURES

System Interface/Performance

UTP to Fiber Media Converter
Built-in 1 port PoE Injector function
RJ-45 port support Auto MDI/MDI-X Function
Auto Negotiation Speed, Half/Full Duplex
Store-and-Forward Switching Architecture

Wide Operating Temperature range from -40°C to 75°C (-E model)

Built-in Link Loss Forwarding (LLF) & Link Fault Pass-Through (LFP) Technology

Power Supply

DC 48V Redundant Power Supply
Overload current resettable Fuse Present

Case/Installation

IP-30 Protection
DIN Rail and Wall Mount Design

Provides EFT protection 3000 VDC for power line

Supports 6000 VDC Ethernet ESD protection

SPECIFICATIONS

IEEE Standards	IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX and 100Base-FX Fast Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.3af Power over Ethernet
Link Lose Forward	TX to Fiber: If TX port link down, the media converter will force Fiber port to link down Fiber to TX: If Fiber port link down, the media converter will force TX port to link down
PoE pin assignment	RJ-45 port support IEEE 802.3af End-point, Alternative A mode. Positive (VCC+): RJ-45 pin 1, 2. Negative (VCC-): RJ-45 pin 3, 6. Data (1,2,3,6 )
Switch Architecture	Store-and –Forward Packet throughput ability (Full-Duplex): 1.488Mpps @64bytes
Transfer Rate	14,880pps for Ethernet port 148,800pps for Fast Ethernet port
MAC Address	2K Mac address table
Connectors	SC (Multi-mode): 50/125um~62.5/125um SC (Single-mode): 9/125um Available distance: 2km (Multi-mode)/30km (Single-mode) Wavelength: 1310nm (Multi-mode/Single-mode) 10/100TX: 1 x RJ-45 with auto MDI/MDI-X function [Multi-Mode] power budget : Min: 9dB , MAX: 19dB. [Single-Mode] power budget : Min: 19dB , MAX: 26dB.
Network Cable	10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5 cable EIA/TIA-568 100-ohm (100m)
Protocol	CSMA/CD
LED	Per unit: Power 1 (Green), Power 2 (Green), Fault(Red) TX: Link/Active (Green), 100M(Yellow), Feeding Power (Green) Fiber: Link/Active (Green), Full duplex/Collision (Yellow)
DIP Switch	DIP Switch 1: OFF: Disables Port /Power Alarm ON: Enables Port /Power Alarm DIP Switch 2: OFF: Disables LLF (Link Loss Forwarding) & LFP (Link Fault Pass- Through) ON: Enables LLF (Link Lose Forwarding ) & LFP (Link Fault Pass-Through) DIP Switch 3: OFF: 100Base-FX Full-mode ON: 100Base-FX Half-mode DIP Switch 4: OFF: Switching mode ON: Media mode (100TX to 100FX)
Power Supply	48VDC (45~56VDC), Redundant power with terminal block
Power Consumption	3.3Watts
Overload current protection	Present
Operating Humidity	5% ~ 95% (Non-condensing)
Operating Temperature	-20°C~60°C / -4°F~140°F (Standard model) -40°C~75°C / -40°F~167°F (-E model)
Storage Temperature	-40°C~85°C / -40°F~185°F
Case Dimension	Metal case,IP-30; 30mm(W)x95mm(D)x140mm(H)
Weight	600 g
EMI & EMS	FCC Class A, CE EN61000-4-2 (ESD), CE EN61000-4-3(RS), CE EN-61000-4-4 (EFT), CE EN61000-4-5 (Surge), CE EN61000-4-6 (CS), CE EN61000-4-8, CE EN61000-4-11, CE EN61000-6-2, CE EN61000-6-4
Safety	CE/EN60950-1
Stability Testing	IEC60068-2-32(Free fall), IEC60068-2-27(Shock), IEC60068-2-6(Vibration)
MTBF	391515 hrs
Warranty	5 years

ORDERING INFOMATION

IPEC-0101FT.….………….….......P/N: 8350-900
1 10/100TX to 100FX Industrial Converter w/PoE injector, Standard Operating Temperature (-20°C~ 60°C)
IPEC-0101FT-30KM..…….….......P/N: 8350-901
1 10/100TX to 100FX 30KM Industrial Converter w/PoE injector, Standard Operating Temperature (-20°C~ 60°C)
IPEC-0101FT-E..………….….......P/N: 8350-905
1 100/100TX to 100FX Industrial Converter w/PoE injector, Wide Operating Temperature (-40°C~75°C)
IPEC-0101FT-30KM-E..….….......P/N: 8350-906
1 10//100TX to 100FX Industrial Converter 30KM w/PoE injector, Wide Operating Temperature (-40°C~75°C)

OPTIONAL ACCESSORIES

DIN Rail Power

AD1240-48S
48VDC, 5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
AD1120-48F
48VDC, 2.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C

APPLICATIONS

DOWNLOADS

Description				Download

IPEC-0101FT Datasheet

IPEC-0101FT Manual