Beijing Xiongyue Technology Co., Ltd.

Home

Profile

Ethernet

Recruitment

Industrial Entry Switches

Industrial Smart-Ring Switches

Industrial Managed Switches

Industrial DNV Type    Switches
  -IES-0005T
  -IES-0008T
  -IEC-0101FT
  -IES-2216C/E
  -LES-2400-RPS

Industrial IEC 61850 Switches

Industrial IP67 / EN50155 Switches

Industrial Converters Series

Industrial PoE Series

Industrial Device Server

Mini-GBIC/GBIC Series

Software & Accessories

	IEC-0101FT

1 10/100TX to 100M-FX Slim Type Converter

DNV Type Approved for Ships, Craft and Off-shore Platforms
UL Class I Division II for Group A,B,C and D hazardous location
Unique DIP switches to set the operation mode
Built-in LLF and LFP technology
Wide-range redundant power with polarity reverse protection

Overview
Features
Specifications
Ordering Info
Applications
Downloads

OVERVIEW

The Lantech IEC-0101FT Industrial Converter is a slim type Industrial converter which has a unique DIP switch to adjust 100M duplex mode and LLF (Link Loss Forwarding) function.

Through the DIP switch, you can also set power alarm and pure converter mode. Featured with LLF function, the Lantech IEC-0101FT is able to auto-cut off connection if one end of connection is down. The built-in LFP (Link Fault Pass-Through) scheme is to cut off Fiber TX or RX when either one has lost connection then trigger LLF to cut off all connection. Smart LLF and LFP functions alert central side switch immediate remedy action when connection is lost.

The Lantech IEC-0101FT is designed to meet the demands of industrial environments, comes packaged in a robust IP 30 housing and has been tested extensively to meet Industrial EMI and EMC standards. With UL Class I Division II approval, IEC-0010FT can be implemented in hazardous or explosive condition without accelerating the potential damage. It is the best choice to be installed in inflammable environment where the liquid, gas and vapor etc might present the hazardous condition which generally to be find in mining, oil & gas, chemical, processing automation areas.

Lantech DNV-Type Approval IEC-0101FT-DNV model meets with the most critical test criteria in DNV Type test directives consisting of MED (Marine Equipment Directive), EMC (Electromagnetic Compatibility Directive) and LVD (Low Voltage Directive) in which vibration, high voltage, compass safe distance, salt mist tests, humidity etc are conducted to ensure the switch sustaining the harsh on-board environments often founded in Ships, Crafts and Offshore platforms.

FEATURES

System Interface/Performance

UTP to Fiber Media Converter
RJ-45 port support Auto MDI/MDI-X Function
Auto Negotiation Speed, Half/Full Duplex
Store-and-Forward Switching Architecture
-E model supports wide operating temperature from -40°C to 75°C
Built-in LLF & LFP Technology

Provides EFT protection 3000 VDC for power line

Supports 6000 VDC Ethernet ESD protection

Power Supply

Wide-range Redundant Dual Power Design
Support 9 to 56VDC power inputs
Overload current resettable Fuse Present
Power Polarity Reverse Protect

IP-30 enclosure with DIN Rail and wall mount design

UL Class I Division II for Group A,B,C and D hazardous location

Hardware Specification
Standards	IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX and 100Base-FX Fast Ethernet IEEE802.3x Flow Control and Back Pressure
Protocol	CSMA/CD
Transfer Rate	14,880pps for Ethernet port 148,800pps for Fast Ethernet port
Connectors	SC (Multi-mode): 50/125um~62.5/125um SC (Single-mode): 9/125um Available distance: 2km (Multi-mode) / 30km(Single-mode) Wavelength: 1310nm (Multi-mode/Single-mode) 10/100TX: 1 x RJ-45 with auto MDI/MDI-X function [Multi-Mode] power budget: Min: 9dB, MAX: 19dB. [Single-Mode] power budget: Min: 19dB, MAX: 26dB.
Transfer packet size	64bytes to 1522 bytes (with VLAN tag).
Mac Address	2K MAC address table
Network Cable	10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5 cable EIA/TIA-568 100-ohm (100m)
DIP Switch	DIP Switch 1: OFF: Disables Port /Power Alarm; ON: Enables Port /Power Alarm DIP Switch 2: OFF: Disables LLF (Link Lose Forwarding) & LFP (Link Fault Pass-Through) ; ON: Enables LLF & LFP DIP Switch 3: OFF: 100Base-FX Full-mode; ON: 100Base-FX Half-mode DIP Switch 4: OFF: Switching mode; ON: Media mode (100TX to 100FX)
Power Consumption	2.74 Watts
Reserve polarity protection	Present
Overload current protection	Present
LED	Per unit: Power 1 (Green), Power 2 (Green), Fault(Red) TX: Link/Active (Green), 100M(Yellow) Fiber: Link/Active (Green), Full duplex/Collision (Yellow)
Operating Humidity	5% ~ 95% (Non-condensing)
Operating Temperature	-20°C~60°C / -4°F~140°F (Standard model) -40°C~75°C / -40°F~167°F (-E model)
Storage Temperature	-40°C~85°C / -40°F~185°F
Case Dimension	Metal case,IP-30; 30mm(W)x95mm(D)x140mm(H)
Weight	600 g
EMI & EMS	FCC Class A, CE EN61000-4-2 (ESD), CE EN61000-4-3 (RS), CE EN61000-4-4 (EFT), CE EN61000-4-5 (Surge), CE EN61000-4-6 (CS), CE EN61000-4-8, CE EN61000-4-11, CE EN61000-4-12, CE EN61000-6-2, CE EN61000-6-4
Safety	UL, cUL, CE/EN60950 UL Class I Division II for Group A,B,C and D hazardous location
Stability Testing	IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)
MTBF	405486 hrs
Power Supply	24 VDC (9~56VDC), 12~36VAC (Optional), Redundant power with polarity reverse protect function and removable terminal block
Warranty	5 years

ORDERING INFOMATION

IEC-0101FT……….………….….......P/N: 8350-020
1 10/100TX to 100FX Multi-mode, 2KM Industrial Converter, Standard Operating Temperature (-20°C~60°C)
IEC-0101FT-30KM....……….….......P/N: 8350-021
1 10/100TX to 100FX 30KM Industrial Converter, Standard Operating Temperature (-20°C~60°C)
IEC-0101FT-E…….………….….......P/N: 8350-025
1 100/100TX to 100FX Multi-mode, 2KM Industrial Converter, Wide Operating Temperature (-40°C~75°C)
IEC-0101FT-30KM-E.……….….......P/N: 8350-026
1 10//100TX to 100FX Industrial Converter 30KM, Wide Operating Temperature (-40°C~75°C)
IEC-0101FT-DNV..…………….........P/N: 8350-020DNV
1 10/100TX to 100FX Multi-mode, 2KM Industrial Converter, Standard Operating Temperature (-20°C~60°C); DNV Type Approved for maritime application
IEC-0101FT-30KM-DNV…....….......P/N: 8350-021DNV
1 10/100TX to 100FX 30KM Industrial Converter, Standard Operating Temperature (-20°C~60°C); DNV Type Approved for maritime application

OPTIONAL ACCESSORIES

DIN Rail Power

AD1048-24FS
24VDC, 2A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
AD1024-24F
24VDC, 1A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
AD1240-48S
48VDC, 5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
AD1120-48F
48VDC, 2.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C

APPLICATIONS

DOWNLOADS

Description				Download

IEC-0101FT Datasheet

IEC-0101FT Manual