Hardware Specification |
Switch Architecture |
Back-plane (Switching Fabric): 5.6Gbps
Packet throughput ability (Full-Duplex): 2.38Mpps @64bytes |
Transfer Rate |
14,880pps for Ethernet port
148,800pps for Fast Ethernet port |
Mac Address |
8K MAC address table |
Connector |
10/100TX: 8 x RJ-45 with auto MDI/MDI-X function
10/100/1000T/ Mini-GBIC Combo: 2 x RJ-45 + 2 x 100/1000 SFP sockets
RS-232 connector: DB-9 |
Network Cable |
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E cable
EIA/TIA-568 100-ohm (100m)
1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E cable
EIA/TIA-568 100-ohm (100m) |
Optical Cable |
Distance:
Multi mode:
0 to 5 km, 1300 nm (50/125 μm, 800 MHz*km)
0 to 4 km, 1300 nm (62.5/125 μm, 500 MHz*km)
Single mode:
0 to 40 km, 1310 nm (9/125 μm, 3.5 PS/(nm*km))
0 to 80 km, 1550 nm (9/125 μm, 19 PS/(nm*km))
Min. TX Output:
Multi mode: -20 dBm
Single mode: 0 to 40 km, -5 dBm; 0 to 80 km, -5 dBm
Max. TX Output:
Multi mode: -14 dBm
Single mode: 0 to 40 km, 0 dBm; 0 to 80 km, 0 dBm
Sensitivity:
-36 to -32 dBm (Single mode); -34 to -30 dBm (Multi mode) |
Protocol |
CSMA/CD |
PoE pin assignment |
RJ-45 port # 1~# 8 support IEEE 802.3af End-point, Alternative A mode. Per port provides 15.4W ability.
Positive (VCC+): RJ-45 pin 1,2.
Negative (VCC-): RJ-45 pin 3,6. |
LED |
System: Power
Per port: Link/Activity, Speed, PoE
Gigabit Combo port: Link/Activity |
Power Supply |
External Power Supply: DC 48V power input |
Power Consumption |
135 Watts(Full Load) |
PoE Power budget |
15.4W per port, Max 84 Watts with 96W DC-48V power adapter |
Operating Humidity |
5% to 95% (Non-condensing) |
Operating Temperature |
Standard: 0℃~45℃; |
Storage Temperature |
-40℃ to 85℃ |
Case Dimension |
217mm (W) x 140mm (D) x 43mm (H) |
Fan Number |
0 |
Installation |
Rack mount and wall mount ear. |
EMI |
FCC Class A, CE |
Safety |
UL, cUL, CE/EN60950-1 |
Warranty |
2 years |
Software Specification |
Management |
SNMP v1 v2c, v3/ Web/Telnet/CLI Management |
SNMP MIB |
RFC 1215 Trap, RFC1213 MIBII, RFC 1157 SNMP MIB, RFC 1493 Bridge MIB, RFC 2674 VLAN MIB, RFC 1643 , RFC 1757, RSTP MIB, Private MIB |
VLAN |
Port Based VLAN
IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to 4K, VLAN ID can be assigned from 1 to 4096.)
GVRP (256 Groups) |
Port Trunk with LACP |
LACP Port Trunk: 4 Trunk groups/Maximum 4 trunk members |
Spanning Tree |
Support IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree |
Pro-Ring |
Support X-Ring, Dual Homing, Couple Ring Topology.
Provide redundant backup feature and the recovery time below 10ms |
Quality of Service |
The quality of service determined by port, Tag and IPv4 Type of service, IPv4/IPv6 Different Service |
Class of Service |
Support IEEE802.1p class of service, per port provides 4 priority queues |
Port Security |
Support 100 entries of MAC address for static MAC and another 100 for MAC filter |
Port Mirror |
Support 3 mirroring types: “RX, TX and Both packet”. |
IGMP |
Support IGMP snooping v1,v2
256 multicast groups and IGMP query
Support multicast filter |
IP Security |
Support 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder. |
Login Security |
Support IEEE802.1X Authentication/RADIUS |
Bandwidth Control |
Support ingress packet filter and egress packet limit
The egress rate control supports all of packet type and the limit rates are 100K~102400Kbps(10/100), 100K~256000Kbps(1000)
Ingress filter packet type combination rules are Broadcast/Multicast/Unknown Unicast packet, Broadcast/Multicast packet, Broadcast packet only and all of packet. The packet filter rate can be set from 100K~102400Kbps(10/100), 100K~256000Kbps(1000) |
Flow Control |
Support Flow Control for Full-duplex and Back Pressure for Half-duplex |
System Log |
Support System log record and remote system log server |
SMTP |
Support SMTP Server and 6 e-mail accounts for receiving event alert |
SNMP Trap |
1. Cold start,
2. Link down,
3. Link up,
4. Authorization fail,
5. PD disconnect trap-PoE port event |
DHCP |
Provide DHCP Client/ DHCP Server functions |
SNTP |
Support SNTP to synchronize system clock in Internet |
Firmware Update |
Support TFTP firmware update, TFTP backup and restore. |
*Future Release
**Optional |
PoE Management
