Hardware Specification |
Standards |
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX and 100BASE-FX with
N-way auto negotiation
IEEE802.3ab Gigabit copper with N-way
auto-negotiation
IEEE802.3z for Gigabit fiber |
Connectors |
100FX Module:
Fiber: Duplex ST/SC/MT-RJ, Simplex SC
(WDM single mode)
RJ-45: CAT-5 (10/100Mbps) Twisted Pair
cable
Gigabit Module:
Fiber: Duplex SC (Single mode 10KM, Multi
mode 500Meters)
RJ-45 Socket: CAT- 5 (1000Mbps) 4 pairs of
UTP/STP cable
CPU Board: RJ-45 for 10/100Mbps, Full/Half
Duplex. Cable support CAT-3/5
(10/100Mbps)
WDM module:
Fiber: Simplex SC (single mode 20KM)
RJ-45: CAT. 5 2 pairs of UTP cable
Mini GBIC module: (for 3.3v only)
Fiber: Mini GBIC (Duplex LC)
RJ-45: CAT- 5 (1000Mbps) 4 pairs of UTP/STP
cable
[Multi-Mode] power budget : Min: 9dB , MAX: 19dB.
[Single-Mode] power budget : Min: 19dB , MAX: 26dB. |
Switch architecture |
Store and Forward, Internal Packet Gap 960ns, Filter illegal and error packet. |
LED |
CPU Module
CPU Ready, Power Good (A, B) Power Fail
(A, B), TX (link/Act, FDX)
100FX Module
Power, TX (Link /Act, speed, FDX), FX (Link
/Act, FDX)
Gigabit Module
Power, Gigabit Copper (Speed, 1000Mbps,
LK/ACT, FDX/COL), Fiber (Link/Act,
FDX/COL)
100/1000TX to MINI GBIC module
Power, Gigabit Copper (Speed, 1000Mbps,
LK/ACT, FDX/COL), Fiber (Link/Act,
FDX/COL) |
Fiber parameters |
Fiber Core:
Multi-Mode (62.5/125um, 50/125um)
Single-Mode (9/125μm)
Wavelength:
100Mbps multi-mode: 1310nm / 100Mbpssingle-mode: 1310nm
100Mbps WDM 1330: TX 1310nm, RX 1550nm
100Mbps WDM 1550: TX 1550nm, RX 1310nm
Available Fiber distance:
100Mbps module: Single-Mode Fiber (30 KM)/ Multi-Mode (2KM)
100Mbps WDM module (WDM13, WDM15):20KM
Gigabit Fiber Distance: SX (Multi-mode) 500Meters
LX (Single mode) 10KM
Optical Transceiver parameter:
100Mbps Multi-Mode: TX (–19dBm), RX
(-31dBm), Power budget (12dBm)
100Mbps Single-mode (30KM): TX (–15
dBm), RX (-34 dBm), Power budget (19dBm)
Gigabit SX Transceiver: TX (–9.5dBm), RX
(12.5 dBm), Power budget (3dBm)
Gigabit LX Transceiver: TX (–9.5dBm), RX
(-20 dBm), Power budget (10.5dBm) |
Transparent packet |
64 to 1518 Bytes for Non-VLAN Ethernet packet
68 to 1522 Bytes for VLAN-Tag type Ethernet
packet |
Power Supply |
Redundant and Load Sharing function support
(AC or DC)
AC 90~240 VAC, 50/60 HZ @ 20A (max)
DC – 40.5 ~ - 57.0VDC @ 20A (max) |
Operation Temp. |
0?C to 45?C (32?F to 113?F) |
Operation Humidity |
10% to 90% (Non-condensing) |
Storage Temp. |
-10?C to 70?C |
Dimension |
448mm(w) * 89mm(H) * 279mm(D) |
EMI & safety |
FCC Class A, CE, UL |
Warranty |
2 years |
Software Specification |
Management |
Telnet
Web
Console (RS-232) |
Web/Telnet |
Can be enabled or disabled |
MIBS |
RFC 1213 MIB II
Private MIB |
SNMP Trap |
Link down
Link up
Power module status change
Authorization Fail
Module plug in and plug out
Chassis configuration change
Module configuration change |
Software Upgrade |
Firmware upgrade by Web interface and TFTP |
Link Loose
Forward |
Each module support LLF feature. It can be set by
Web or CLI menu
LLF Mode TX → Fiber: UTP port link down, the
fiber port will be forced down
LLF Mode Fiber → UTP : Fiber port link down, the
UTP port will be forced down |
Packet counter |
UTP port: IN-good / In-bad packet counter
out-good /out-bad packet counter
collision counter
Fiber port: IN-good / In-bad packet counter
out-good /out-bad packet counter |
SNMP Trap Node |
Up to 4 Trap node |
IP security |
IP security for telnet
HTTP and SNMP access
Up to 4 IP nodes when security is enabled |
Module Note |
Per module can added notice for allocate
information and characters which is up to 32 |
Back-door pass word |
Supports on CLI mode only |
TS-1000 |
Loop back test, remote configuration |
SNTP |
RFC2030 Simple Network Time Protocol |
Events log |
Up to 4095 event records. It can be reviewed by CLI
and Web browser mode |
16 slot converter chassis with 2 power slots
