Hardware Specification |
IEEE Standards |
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3z Gigabit Fiber
IEE802.3ab Gigabit 1000BASE-T
IEEE802.3x Flow Control and Back pressure
IEEE802.3ad Port trunk with LACP
IEEE802.1d Spanning tree protocol
IIEEE802.1w Rapid spanning tree protocol
IEEE802.1p Class of service
IEEE802.1Q VLAN Tagging
IEEE 802.1x user authentication
IEEE802.3af Power over Ethernet |
Connectors |
10/100TX: 24 x RJ-45
Gigabit Copper: 2 x RJ-45
2 MINI GBIC for MINI GBIC transceiver |
Switch architecture |
Store and forward switch architecture.
Back-plane up to 8.8Gbps |
MAC address |
8K MAC address table with Auto learning function |
LED |
System Power
10/100TX RJ-45 Port: Link/Active (Green: 1000Mbps/ Orange: 10/100Mbps), Full-duplex/collision
MINI GBIC/ Copper: Link/Activity (Green:1000Mbps/ Orange: 10/100Mbps),
Full duplex/collision |
Connector |
24-port RJ-45 for 10/100TX
RJ-45 Pin assignment and polarity: 1/2:RX signal |
RS-232 connector |
One RS-232 DB-9 female connector for switch management |
Remote power feeding |
End-point insert type and compatible with IEEE802.3af
Per port feeding power: 15.4Watts (maximum) |
Power |
Embedded AC power supply: AC 100~240V, 50/60Hz, 200W |
Power consumption |
20W (maximum /without PD) |
Ventilation |
1 DC Fans with detect function |
Operating Temperature |
0°C ~45°C (32°F ~113°F) |
Storage Temperature |
-40°C to 70°C (-40°F ~158°F) |
Case Dimension |
440mm(W) x 280mm(D) x 44mm(H) |
EMI |
FCC Class A, CE |
Safety |
UL, cUL, CE/EN60950 |
Warranty |
2 years |
Software Specification |
Management |
SNMP/ Telnet/ web-browser/ CLI management |
SNMP MIB |
RFC 1157 SNMP,
RFC 1213 MIB II,
RFC 1643 Ethernet like,
RFC 1493 Bridge MIB,
RFC 2674 VLAN MIB,
private MIB,
RFC 1628 UPS MIB,
RFC3621 Power Ethernet MIB |
RFC standard |
RFC 2030 SNTP, RFC 2821 SMTP (option), RFC 1215 Trap, RFC 1757 RMON 1 |
Type of Trap |
Cold start, link down, link up, authorization fail, Trap station up to 3. Private trap for power supply device. |
Software Upgrade |
TFTP and console firmware upgradeable. |
Port Trunk |
Support IEEE802.3ad with LACP function. Up to 7 trunk groups and group member up to 4. The trunk port within 24-port 10/100TX and extension module. |
Spanning Tree |
Support IEEE802.1d spanning tree, IEEE802.1w RSTP |
VLAN |
Port based VLAN
IEEE802.1Q Tag VLAN
VLAN groups up to 256 |
Class of Service |
Per system supports high and low queues. The priority service rule: first come first service, all High before Low, WRR for High or low weight. |
Port-based Priority |
Support 3 settings: “Disable, Low or High priority”. When set to “Disable”, the income packet will follow QOS policy; Otherwise, the packet will follow port priority setting to “High/Low” queue. |
IGMP |
It supports IGMP snooping for multimedia application and supports 256 groups |
Port Security |
It supports ingress and egress MAC address filter and static source MAC address lock. |
Port Mirror |
Global system supports 3 mirroring types: “RX, TX and Both packet”. The maximum of port mirror entries is up to 25. |
Bandwidth Control |
Per port supports bandwidth control. Per level 100Kbps. |
802.1x Authentication |
Supports IEEE802.1x User -Authentication and can report to RADIUS server.
Reject / Accept / Authorize / Disable |
DHCP |
DHCP client |
Packet filter |
Broadcast storm filter |
Port configuration
control |
Port Disable / Enable.
PD detect control (enable/disable), Classification detect control (enable/disable) |
Fault status detect |
Null: no PD present
Overload: current support over 475mA @ DC 48V and over 50 milliseconds
DR fail: PD discovery resistor is not in the limited range |
Mode status |
System detects status, it will show I –sample, V-sample and R-detect. |
Parametric information |
It will show current PD parameters, it include Discover-resistor detected value, current, voltage, power consumption, classification current and determined class |
SNTP |
Supports RFC 2030 Simple Network Time Protocol |
System log |
System Log record up to 1000 entries. |
Power monitor |
Support power supply monitoring function for AC power, DC power, fan status
Additional power supply can be installed with POE switch and POE-UPWM. |
Power testing |
Support test function to testing power supply. |
PoE Management |
PoE Enable/Disable,
Power limit by Classification;
Power limit by management,
Power feeding priority
Detect Legacy Signature |
*Future Release
**Optional |
Embedded 24 port PoE Injectors compliant with 802.3af up to 180W PoE power feeding
